DIP/ SMT/ DIP+SMT/ Wire Assembly Type
ID: Ø1.0 、Ø1.3、Ø1.65、Ø2.0、Ø2.35、Ø2.5
A DC input Jack (or DC plug, for one common type of connector) is an electrical connector for supplying direct current (DC) power.
Compared to AC power plugs and sockets, DC input jack/connectors have many more standard types that are not interchangeable. The dimensions and arrangement of DC input jack/connectors can be chosen to prevent accidental interconnection of incompatible sources and loads. Types vary from small coaxial connectors used to power portable electronic devices from AC adapters, to connectors used for automotive accessories and for battery packs in portable equipment.
A DIN connector is an electrical connector that was originally standardized in the early 1970s by the Deutsches Institut für Normung(DIN), the German national standards organization. There are DIN standards for a large number of different connectors, therefore the term "DIN connector" alone does not unambiguously identify any particular type of connector unless the document number of the relevant DIN standard is added (e.g., "DIN 45322 connector").
DIN-3 Diagram.svg DIN-4 Diagram.svg DIN-4b Diagram.svg DIN-5b Diagram.svg DIN-5c Diagram.svg DIN-5 Diagram.svg DIN-6 Diagram.svg DIN-7 Diagram.svg DIN-8 Diagram.svg
All male connectors (plugs) of this family of connectors feature a 13.2 mm diameter metal shield with a notch that limits the orientation in which plug and socket can mate. A range of connectors of the same form that differ only in their pin configuration exist and have been standardized originally in DIN 41524 / IEC/DIN EN 60130-9 (3-pin at 90° and 5-pin at 45°), DIN 45322 (5-pin and 6-pin at 60°), DIN 45323 (6-pin), DIN 45329/IEC 10 (7-pin at 45°), DIN 45326 / IEC/DIN EN 60130-9 (8-pin at 45°), and other standards for a range of different applications, including the following examples:
Battery connector is used for connecting a removable battery found in most of portable devices. They have securing the connection in contact area and their pitch size from 1.4 to 5.0mm, the ampere from 1.0 to 10. We can fulfilling all the customized requirements including the required various mating height for space saving.